Showing posts with label Machines Interview Questions. Show all posts
Showing posts with label Machines Interview Questions. Show all posts

Thursday, December 22, 2016

Electrical Machines Viva Questions and Answers: Part-1

Electrical Machines Viva Questions and Answers

[1] How to reverse the direction of rotation of dc motor?
To reverse direction of rotation of dc motor, either direction of main field produced by the field winding is reversed or direction of the current passing through the armature is reversed.
By changing the direction of current passing through the field winding,the direction of the main field can be reversed.

[2] What are the functions of yoke? what is the choice material for the yoke?

  1. It serves the purpose of outer most cover of the dc machine. so that the insulating material get protected from the harmful atmospheric environmental like noise, dust and various gases like SO2, acidic fumes etc.
  2. It provides mechanical support to the poles.
  3. It forms a part of the magnetic circuit.
  4. It provides a path of low reluctance for magnetic flux.
  5. It is prepared by using cast iron. For large machines, rolled steel, cast steel, silicon steel is used which provides high permeability.

[3] Why generators are operated in parallel?
The generators are operated in parallel to get,
  1. Continuity and reliability of service without interruption
  2. Maintenance and repair will be easy
  3. Efficient operation of each generator
  4. Increase in plant capacity

[4] Why pole shoe has been given a specific shape?
  • It is necessary that maximum area of the armature comes across the flux produced by the field winding. 
  • Pole shoe enlarges the area of armature core to come across the flux, which is necessary to produce larger induced emf. To achieve this, pole shoe has been given a particular shape.
[5] What are the basic components required for generator action to exits?
A generating action requires following basic components to exits,
  1. The conductor or a coil
  2. The flux
  3. The relative motion between conductor and flux
Thanks for reading... 

Monday, December 1, 2014

Special motors (Permanent Magnet Synchronous Motor) Interview Questions

Special Machines (Permanent Magnet Synchronous Motor)  Interview Questions

[1] What is the PMSM?
In medium and small size synchronous motors, DC field can be produced by permanent magnets. Such kind of motors are called as PMSM

[2] What are the advantages and disadvantages of PMSM
Advantages
Elimination of field copper loss
Higher power density
Lower rotor inertia
Robust construction
Disadvantages
Power rating low
Motor power factor can not be controlled because of field excitation cannot be controlled

[3] What are the classification of PMSM
Based on construction
    Surface mounted PMSM
    Interior mounted PMSM
Based on the nature of voltage induced
    Sinusoidally excited
    Trapezoidally excited

[4] Give some applications of PMSM
Robots
Machine tools

[5] Define torque angle
The angle between excitation emf and supply voltage. This angle is called torque angle or load or power angle .

[6] What are the different classifications of synchronous motor?
(i) Wound field synchronous motor
      Cylindrical rotor construction
      Salient pole rotor construction
(ii) Permanent-Magnet Synchronous Motors
      Surface mounted (Projecting Type and Inset Type)
      Interior Buried Type
(iii) Synchronous Reluctance Motors
(iv) Hysteresis motors

[7] What are the different modes employed to achieve variable frequency control in synchronous motors?
Separate or true synchronous mode
Self controlled mode
[8] Why a Synchronous Motor without damper winding is used, in the drive system employing a Cycloconverter?
A Synchronous Motor without the damper winding is used, because the damper winding reduces the inductance of the machine, and therefore is ability to filter out harmonics in the output voltage of Cycloconverter. Since the drive operates in self-controlled mode, the damper winding is not needed for its converter.

Interview questions on more power electronics topics are covered in other posts... Please leave your comments below...

Monday, June 23, 2014

Alternators related Interview Questions with Answers

Frequently Asked Interview Questions on Alternators
In this post we had given few Alternators related Interview questions with solutions. We believe that it will be helpful for your interview preparation. Please leave your comments in comments section.

[Q] What is meant by synchronising the alternators?
The process of connecting two or more alternators in parallel for supplying a common load is called synchronising.

[Q] What are the conditions to be satisfied for proper synchronising of alternators?
(i) The terminal voltage of the incoming alternator must be the same as bus-bar voltage.
(ii) The speed of the incoming alternator must be such that its frequency equals to the bus-bar frequency
(iii) The phase sequence of the incoming alternator must be the same as that of the other alternators or busbars.

[Q] What are the advantages of Parallel operation of alternators?
(i) It ensures continuity of power supply to consumers in case of breakdown of an alternator in an generation station.
(ii) This is economical and improves the efficiency of the generating station.
(iii) When the demand of power increases, new alternators can be installed to operate in parallel.
(iv) It is not possible to built single large size alternator to meet the requirement.

[Q] What are types of rotors used in alternators?
There are two types of rotors used in alternators namely
(i) Salient pole rotor
(ii) Smooth cylindrical type rotor

[Q] What are the advantages of providing damper winding?
The damper winding is useful in preventing the hunting ( momentary speed fluctuations) in generators.
The damper winding also used to maintain balanced 3 phase voltage under unbalanced load conditions.

[Q] What are the various methods to determine the voltage regulation of the large alternators?
In case of small machines, the regulation can be found by direct loading.
For large alternators, to find the voltage regulation indirect methods are used. They are
(i)Synchronous Impedance Method.
(ii) The Ampere-turn method.
(iii) Zero power factor or Pointer Method.

[Q] What is the basic principle of alternators?
Alternators is noting but a AC generators. They operate on the fundamental principle of electromagnetic induction as dc generators.
ie, when the rotor rotates, the emf is induced in the stator.

[Q] Which type of rotor is suitable for low speed alternators? salient pole type or cylindrical type rotor?
Salient pole type alternators are suitable for low and medium speed alternators. It has large number of projecting poles. It has large diameters and short axial lengths.

[Q] What is meant by turbo alternators?
High speed alternators are called as Turbo alternators.
As it runs at very high speed, salient pole rotors are not used. Smooth cylindrical type rotor is suitable for turbo alternators.

Please leave your comments below...That is highly appreciated...

Wednesday, June 4, 2014

Induction Motor Interview Questions: Part 1

Basic Interview Questions on Induction Motors:

[Q] How does the Induction motor work? (OR) Why does the Rotor rotate?
  • When the 3 phase stator windings are fed by 3 phase supply, a magnetic flux of constant magnitude which is rotating at synchronous speed is set up. 
  • The flux passes through the air-gap and sweeps past the rotor surface  thus it cuts the rotor conductors. 
  • Due to the relative speed between the rotating flux and the stationary rotor conductors, an emf is induced in the stationary rotor conductors as per the Faraday's laws of electromagnetic induction.
  • The frequency of the induced emf is the same as the supply frequency.
  • Its magnitude is proportional to the relative velocity between the flux and the conductors.
  • Its direction will be as per Fleming's right hand rule.
  • Since the rotor conductors form a closed circuit the rotor current is produced.
  • This current's direction will oppose the very cause producing it ( as per Len's law)
  • Here the cause is the relative velocity between the rotating flux of the stator and the stationary rotor conductors.
  • Hence, in order to reduce the relative speed, the rotor begins to rotate in the same direction as that of the rotating magnetic flux and tries to catch up with the rotating flux. Thus the rotor of induction motor starts to rotate.
[Q] What is the general working principle of Induction motor?
  • The conversion of electrical power into mechanical power takes place in the rotating part of an electric motor. 
  • In DC motors the electrical power is conducted directly to the armature through brushes and commutator. 
  • Thus the DC motor can be called as conduction motor. But in case of AC motors, the rotor receives electric power, not by conduction but by induction. 
  • This is exactly in the same way as the secondary of two winding transformer receives its power from the primary. 
  • That is why such motors are known as induction motors. 
  • Thus an induction motor is also known as rotating transformer ( ie, one in which primary winding is stationary and the secondary is free to rotate)
[Q] What is the advantage of skewed stator slots in the rotor of Induction motors?
In the induction motor design, the rotor slots are purposely made with a slight skew arrangement. It will not be parallel to the shaft. 
This is for the purpose of reducing magnetic locking or reducing magnetic attraction between stator and rotor teeth. 
In addition to that this arrangement will help to reduce the magnetic hum and noise.

[Q] What is meant by cogging in the Induction motor? How to prevent the cogging?
When the number of teeth in stator and rotor are equal, the stator and rotor teeth have a tendency to align themselves exactly opposite to each other, since this corresponds to minimum reluctance position. In such case the rotor may refuse to accelerate. This phenomenon is called as magnetic locking or cogging. 
This problem can be prevented by proper choice of stator and rotor slots and also by skewing the rotor slots by one slot pitch.

[Q] What are the various methods of measuring slip?
1. By actual measurement of rotor speed
2. By measurement of rotor frequency
3. Stroboscopic method

[Q] What are the various methods of speed control in three phase induction motors?
(i) Control from stator side
1. By changing the supply frequency
2. By changing the number of stator poles
3. By changing the supply voltage
(ii) Control from rotor side
1. By inserting resistance in rotor circuit
2. By various ways of cascade connection
3. By injecting EMFs in the rotor circuit.

[Q] What is meant by crawing in the induction motor?
In induction motors, particularly squirrel cage type induction motors, sometimes exhibit a tendency to run stably at speeds as low as one-seventh of their synchronous speed Ns. This phenomenon is known as crawling of an induction motor and the speed is called as crawling speed.